Technics Turntable Oil
Introduction of hydraulic excavators operating procedures
hydraulic excavator is the most successful production and marketing of construction machinery, but many users do not have the proper use of hydraulic excavators, resulting in damage to the machine due to operator error. The staff said that the manipulator must be clearly aware of hydraulic excavators operating procedures to avoid unnecessary mistakes led to the maintenance of the machine.
href = "http://www.minidigger.org"> the hydraulic excavator before the technical preparations for
1) engine parts, in accordance with general operating procedures of the relevant regulations.
2) the engine before starting or operating signal.
3) Check for leaks in the hydraulic system; excavator tires should check your tires is intact, the pressure for compliance, control gear, brake systems, institutions and rotary instruments, meters, and after the commissioning, verify that the back to allow normal access to work in your state.
4) More information about the task of construction and the situation. Check the weather Idle land excavator solid stability, wheel excavators have to add the support to maintain stability and reliable. Check the road closures and stability trench on the slope to prevent the excavator from falling.
5) any person is prohibited areas remain operational areas of the excavator. Prohibiting access to the cockpit.
6) dump truck excavator operating the access roads on the ground should be.
Hydraulic excavator and moving requirements Technical
1) The operator of the excavator was to prohibit any person who, under the bulldozer and delivery of goods, while not allowed to work while that maintenance does not; arbitrarily adjust the motor (speed controller), and hydraulics, electrical control system, should pay attention to the selection and creating a sound working face, dig dig the hole is strictly prohibited.
2) Progress excavator dump ran after discharge should be carried out; download truck when the collision without any part of the case, should reduce the height of idleness during the day, cut the top of the cube of the dump truck cab.
3) prohibits the use of the spoon crushed solid objects, where large rocks or hard objects, should continue after removal operations, the prohibition excavation indicated by five or more blasting of rock.
4) prohibiting the excavator deployed in mining operations upper and two lower within the same paragraph, bulldozers move into the work surface should be flat on the ground first, and the channel clear of obstructions.
5) prohibit the use of the bucket cylinder takes the path set out the archaeological excavations. excavator bucket did not leave the land can not be transverse or rotational movement in motion.
6) prohibit the use of drag otherness excavator boom horizontal hydraulic excavator mining methods can not be beaten.
7) The excavator in making rotation, you can not turn the handle to reverse the operation.
the driver should always pay attention to performance excavators found abnormal should immediately stop monitoring and troubleshooting time.
9) In the operation of the bulldozer, run the process, check always the hydraulic oil temperature are normal.
10) Excavator in the case of the need for wires, crossing roads, bridges and culverts, the understanding of situation after the adoption, if necessary, command groups hand excavator and a distance on the tightrope of not less than 5 m should be avoided whenever possible walk backwards.
11) Excavator-time implementation of the boom must be parallel to the running gear, turntables should be blocked, the cube of about 1 m of soil. Downhill running low profile should be used to prohibit sliding posts.
12) Excavator routes should be with the slope, ditches, pit to maintain sufficient distance ensure safety; cross sections should be smooth and uniform use of low-grade roads, if necessary, the use of wood, stones, etc. to be an omen.
Hydraulic excavator operation after the technical work
1) The excavator was parked in the flat, solid, subject areas traffic and the application of reverse-mounted parking brake. When necessary, such as parking ramp, rolling his forehead and the back pad assembly Wedge.
2) regularized fuselage, floor socket, working joystick device located in the position, closing windows and doors before the driver left after the bulldozer.
3) In accordance with the statutes of the guarantee, to carry out routine maintenance of the bulldozers.
Get more excavator and construction machinery, please visit: http://www.minibulldozer.net
About the Author
sirvice & repire on the power switch on a technics turntable part 1
|
|
Liquid Bearings 100%-synthetic Oil for all turntables, Provides Superior Lubrication and smoother, quieter operation! $6.99 This is the synthetic lubricant that consistently outperforms all others currently available. It has incredible low and high-temperature characteristics, which is absolutely necessary for proper turntable lubrication but completely lacking in petroleum-based oils. Don’t use them on your turntables any longer! Actual oils and lubricant sprays leave sticky deposits when they evaporate over time. Rea… |
|
|
Liquid Bearings, SUPERIOR synthetic oil for DJ turntables, keeps all parts moving freely and quietly!! $6.99 This is the synthetic lubricant that consistently outperforms all others currently available. It has incredible low and high-temperature characteristics, which is absolutely necessary for proper turntable lubrication but completely lacking in petroleum-based oils. Don’t use them on your tables any longer! Actual oils and lubricant sprays leave sticky deposits when they evaporate over time. Real o… |
|
|
Technics Lubricating Oil Lube Oil for Turntable $12.95 This Is A Technics lubricating oil for all turntable direct drive stater motors. This Lubrication Oil Can Be Use With All Technics Turntable SL1200 Series Include MKII, MK5,M5G,M3D… |